Non-Contact Water Level Sensor
Non-contact water level sensor that measures water level from above the surface. No contact, no corrosion and no cleaning. Ideal for sumps, dirty water and STP tanks.
The Aquabrim Non-Contact Water Level Transmitter is a contactless water level sensor for homes, housing societies, commercial buildings and industrial sites across India. It mounts at the top of the tank and measures the water level from above the surface, without ever touching the water. The reading is sent wirelessly to your Aquabrim controller or dashboard, so you always know the exact level.
Sensors that sit inside the water face a tough life. Hard water leaves scale, dirty water clogs them, and chemicals and sewage corrode them over time. A non-contact water level sensor avoids all of this. Because nothing touches the water, there is nothing to rust, foul or clean. That makes it the right choice for underground sumps, rainwater tanks, STP and ETP tanks, and any tank where water quality is poor or hygiene matters.
This non-contact water level transmitter sends its readings wirelessly, so no cable has to run from the tank to the controller. Paired with Aquabrim’s Trigger, Macro or Matrix controllers, it gives fully automatic motor control with overflow and dry-run protection. Connected to the IoT Gateway, it shows live levels on your phone from anywhere.
Key Features
Technical Specifications
Everything you need to know about the Non-Contact Water Level Sensor at a glance.
FAQ
Frequently Asked Questions
A non-contact water level sensor measures the water level from above the surface, without touching the water. It is mounted at the top of the tank and reads the distance to the water to calculate the level.
Float and probe sensors sit in the water, so they rust, collect scale and get clogged. A non-contact sensor never touches the water, so it needs no cleaning and lasts much longer.
Yes, Because it doesn’t touch the water, it works well in sumps, rainwater tanks, STP and ETP tanks, and any tank with dirty or chemical-laden water.
A non-contact water level sensor is ideal for underground sumps. Sump water often carries dirt and sediment, which damages in-water sensors but has no effect on a contactless one.
No, It sends the reading wirelessly to the Aquabrim controller, so no cable runs between the tank and the motor.
It works with Trigger (municipal supply), Macro (borewell) and Matrix (multiple tanks) for fully automatic motor control.
Yes, When connected to Aquabrim’s IoT Gateway, live levels and alerts are available on the Aquabrim app and web dashboard.
The capacitive water tank level sensor sits inside the tank and is ideal for clean overhead tanks. The non-contact water level sensor is mounted above the water and is best for sumps, dirty water and tanks where hygiene matters.
Measure Water Level Without Touching the Water
Maintenance-free level sensing for sumps, dirty water and STP tanks.